Safe Area AC Motors

W Aluminium

Construction: Aluminium
Frame sizes: 63 to 180
Output: 0.07kW to 22kW

Catalogue
Safety Leaflet
Installation & Maintenance booklet

The W aluminium range covers products with outputs from as little as 0.07kW to 22kW in frame sizes WU-DA63S to WU-DA180L, in either 2,4,6 or 8 pole speeds.

They are widely used in a diverse range of applications from food and drink to water and sewage. From heating and ventilation to refrigeration.

Some of the benefits of aluminium over cast iron include high resistance to corrosion and atmospheric attack (except chlorine, salt-laden or sulphuric acid) and the fact that aluminium is approximately one third the weight of cast iron.

W Cast Iron

Construction: Cast Iron
Frame sizes: 80 to 355
Output: 0.75kW to 400kW

Catalogue
Safety Leaflet
Installation & Maintenance booklet

The W cast iron motor range covers products with outputs from as little as 0.75kW to 400kW in frame sizes 80 to 355L.
They are suitable for use within a diverse range of applications from food and drink to china clay production. From roller table drives to refrigeration.

Many applications often have adverse operating conditions including repeated starting and occasional overloading; the W cast iron range is well suited to these situations.

A virtual go anywhere motor, this cast iron range has a full 3-year guarantee.

Series 10

Construction: Aluminium or Cast Iron
Frame sizes: 56 to 450
Output: 0.09kW to 900kW

Catalogue
Safety Leaflet
Installation & Maintenance booklet

A high quality industrial standard range of electric motors with a Brook Crompton specification suitable for most industrial applications.

The aluminium motors have outputs from 0.09kW to 18.5kW in frame sizes B-DA56 to A-DA160.

The cast iron range of motors have outputs from 0.09kW to 900kW in frame sizes B-DF71M to BU-DF450, in either 2,4,6 or 8 pole speeds.

Brake Motors

Construction: Aluminium or Cast Iron
Frame sizes: 63 to 355
Output: 0.07kW to 400kW

Catalogue
Safety Leaflet
Installation & Maintenance booklet

Brook Crompton offers the most comprehensive range of brake motors with highly competitive delivery times, due in part to its innovative brake kit concept available on W motors.

Single Phase

Construction: Aluminium

Frame sizes:
71 to 90 (Capacitor Start / Induction Run)
71 to 100L (Capacitor Start / Capacitor Run)
63 to 90L (Permanent Capacitor)


Outputs:
0.12kW to 1.5kW (Capacitor Start / Induction Run)
0.18kW to 3.0kW (Capacitor Start / Capacitor Run)
0.09kW to 2.2kW (Permanent Capacitor)

Catalogue
Safety Leaflet
Installation & Maintenance booklet

Single phase motors are used primarily in small workshops and farms with a domestic supply. Some industrial equipment are specifically for use with a single phase electricity supply, such as fans, blowers, centrifugal pumps and high pressure washers.

Dependent on the application we are able to offer different types of single phase motors

Hazardous Area AC Motors

Ex d(e)

Construction: Cast Iron
Frame sizes: 90 to 315
Output: 0.37kW to 315kW

Catalogue
Safety Leaflet
Installation & Maintenance booklet
Technical Section

The Ex d(e) range of flameproof cast iron motors cover outputs from 0.37kW to 200kW in frame sizes W-EF90 to W-EF315, in 2, 4, 6, & 8 pole speeds. ATEX approved by Baseefa.

EEx nA

Construction: Aluminium or Cast Iron
Frame sizes: 63 to 355
Output: 0.07kW to 400kW

Catalogue
Safety Leaflet
Installation & Maintenance booklet
Technical Section

The W EEx nA non-sparking range of motors covers products with outputs from 0.18kW to 400kW in cast iron frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole speeds (also available in aluminum from 71 to 180 frames).

All relevant products fully comply with the requirements of ATEX.

Dust Ignition Proof

Construction: Aluminium or Cast Iron
Frame sizes: 63 to 355
Output: 0.07kW to 400kW

Catalogue - contact sales
Safety Leaflet
Installation & Maintenance booklet
Technical Section

The dust ignition proof range of W motors covers products with outputs from as 0.18kW to 315kW in cast iron frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole speeds. All relevant products fully comply with the requirements of ATEX.

EEx e

Construction: Aluminium or Cast Iron
Frame sizes: 63 to 355
Output: 0.07kW to 400kW

Catalogue - contact sales
Safety Leaflet
Installation & Maintenance booklet
Technical Section

The W EEx e increased safety range of motors covers products with outputs from 0.18kW to 315kW in frame sizes W-DF80M to
W-DF355L, in either 2,4,6 or 8 pole speeds. ATEX approved by Baseefa.

Thermal Insulation

Thermal Insulation is normally requested for two reasons; firstly when electrical insulation is required to work in high temperature ranges, secondly when there is need to prevent the loss of heat from a system

Read More...

Electrical Insulation

Electrical insulation is chosen for its ability to resist the flow of electricity, nonconductive, it can be supplied in flexible thin films, thicker flexible laminates or rigid laminates and can be offered to suit various temperature ranges.

Read More...